Although it may seem quite difficult at first, diagnosing and fixing air conditioner problems can be broken down into manageable steps that will allow you to resolve the problem. Be it warm air blowing from your AC unit, weird sounds emanating from the duct or the unit not being able to cool, the trick lies in knowing the common signs and causes. When you use the air conditioning troubleshooting service by 7Days Aircon, expect quick and reliable repairs that give your system good as new performance.
Check the Thermostat Settings
The thermostat is the first thing that one needs to look into, especially when you do not feel cool sufficiently from your air conditioning unit. First, make sure that the units are on and locked to ‘cool’ while the required temperature has to be set lower than that of the room. If there are still issues in determining what the issue is, then it would be advisable to visit tuning experts at aircon service singapore , who will assist in diagnosing and repairing whatever problems are affecting the thermostat of your air conditioning.
Inspect the Air Filters
The presence of dirt or debris in the air conditioning unit is one of the number one elements that hinder cooling efficiency. Suppose air filters are filled with dirt and dust. If air filters are filled with dirt and dust, they will be fully obstructing the airflow increasing the temperature of the system and thereby affecting the system’s capacity to cool air. To remedy this, proper actions include regularly checking the filters and cleaning or changing them as often as necessary.
Search for Refrigerant Leaks
When refrigerants become low, an air-conditioning unit can run constantly while failing to cool completely or blowing out warm air. As with any leak within the refrigerant, the system might be unable to draw sufficient heat from the indoor air, resulting in inadequate cooling. Unfortunately, fixing a refrigerant leak is not something you could do yourself because it calls for professional intervention.
Check the Condenser and Evaporator Coils
Another efficiency component in air conditioning systems is the condenser and evaporator coils. The evaporator coils extract heat from the air, while the condenser coils force the air in a certain direction. If either coil is dirty, it can become inefficient and be unable to work at its rated capacity, further reducing the AC that can be delivered. Inspect these coils and eliminate debris to increase cooling efficiency by improving airflow.
Examine the Ductwork
Air ducts that are not properly sealed or have holes in them that allow air to escape or enter will often cause cooling systems to consume a lot of energy and still be ineffective. While examining ductwork, inspect any wide areas that can connect loose ends, including those adjacent to junctions.
Address Strange Noise
Some uncommon sounds such as squeals, clinks, hisses and the sort may cue the users of various problems. For instance, if the motor is damaged, a part is free, or a few refrigerants are leaking. If the air-con machine has commenced making those kinds of noises, then there’s likely to be a problem that wishes to be resolved. Strange noises can be quite disruptive, so one should switch them off as soon as possible and contact an appropriate technician.
Check the Drain Line
At times, the air conditioning unit will cause more air than moisture, thanks to the drainage pipe from the unit, which also acts as an exit for excess water. So if the moisture drainage pipe gets blocked, it can cause the same effects as water penetrating the space – mold and poor cooling will occur.
Hire a Professional Technician
Most of the steps can be done by homeowners, but some air conditioning problems are best left to professionals. If you need to know what the problem is or if, after troubleshooting, your air conditioning unit still needs to be fixed, now is the time to seek help. They perform detailed diagnosis and repairs that enable your AC to maximize efficiency.
